| |
More Details |
|
Log Electrical Boxes
|
| |
"Click photo for more details"
Here is the perfect way to solve any problems associated with the rounded surface face of log sidng and any electrical box/plug/light fixture/switch that you may encounter along the way. These boxes are designed to be used with existing electrical boxes that are already in place or can be used in totally new construction.
|
|
More Details |
|
6" Pine Vertical Outside Corner
|
| |
Here's the answer for finishing off the outside corner of your log siding project.
Made from a Kiln Dried Log with a notch cut from the back side which mounts to your outside corner and has flat faces engineered on each side to accept your log siding with a clean butt joint. Just finish off with a bead of caulk to keep out moisture.
Each are just under a 6" Diameter.
|
|
More Details |
|
8" Pine Vertical Outside Corner
|
| |
Here's the answer for finishing off the outside corner of your log siding project.
Made from a Kiln Dried Log with a notch cut from the back side which mounts to your outside corner and has flat faces engineered on each side to accept your log siding with a clean butt joint. Just finish off with a bead of caulk to keep out moisture.
Each are just under 8" in Diameter.
|
|
More Details |
|
3 x 4 Pine D Trim
|
| |
The perfect partner match for trimming out your windows and doors
when using our quarter log siding!
|
|
More Details |
|
4 x 4 Pine D Trim
|
| |
The perfect partner match for trimming out your windows and doors
when using our half log sidings!
|
|
More Details |
|
3 x 4 Cedar D Trim
|
| |
The perfect partner match for trimming out your windows and doors
when using our quarter log siding!
|
|
More Details |
|
Pine Quarter Log Inside Corner
|
| |
The perfect partner match for trimming out an inside corner
when using our quarter log siding! Basically it's a standard square 3 x 3 with one edge rounded over which makes for a clean visible edge that matches up well to your log siding. Finish off with some Sikkens Stain and a bead off caulk.
|
|
More Details |
|
Pine Half Log Inside Corner
|
| |
The perfect partner match for trimming out an inside corner
when using our half log siding! Basically it's a standard square 4 x 4 with one edge rounded over which makes for a clean visible edge that matches up well to your log siding. Finish off with some Sikkens Stain and a bead off caulk.
|
Midwest Fastener Corp
|
More Details |
|
Oly Log Timber Screw Fasteners
|
| |
Clearance while quantities last!
Screws are available in 6, 8 & 10 inch lengths. Olylog type timber screw fasteners are sold by the box of 50 pieces each (the 10 incher's in 40 ct boxes). Each has a 1/4" shank diameter and 2" thread that give each fastener the ability to pull and hold logs into position. Offers fast drilling and threading with no need to pre-drill. 5-16" hex head typical on all sizes. Green Ceramic coating for protection from the elements. Great for installing Log D Trims, Vertical Log Corners and most all log applications. Click photo for more Details. Usually ships in 1-3 days.
|
FastenMaster
|
More Details |
|
Oly Log TimberLok Screw Fasteners
|
| |
These are the Original OlyLag screw, and are packaged in easy to handle plastic buckets (250 ct.) or in the smaller sized (50 ct.) cardboard boxes so the packaging becomes "TimberLok" screws....Click "More Details" or Photo at left
• Stronger design shear values than 3/8" lags.
• Nationally recognized testing and code approvals.
• Sharp point and aggressive thread penetrate the densest woods without predrilling.
• Unique tapered head countersinks easily into wood for flush appearance.
• Variety of lengths, from 4" to 10", to match every application.
• Proprietary three step coating process protects against corrosion, even in pressure treated wood. ACQ Approved.
• Usually Ships in 0-3 days.
• Free bit in every package!!!
|
Midwest Fastener Corp
|
More Details |
|
8 x 2-1/2" Galvanized Deck Screws (Box)
|
| |
Decking screws are galvanized and great for mounting our log siding to whatever project you have going! Available in 8 x 2-1/2" size in 5 lb. boxes of approximately 491pcs. each.
|
