|
Periodic maintenance of Lifeline Advance clear topcoat helps to insure that you will get the absolute longest possible life from your exterior stains. If you are not sure whether the addition of Lifeline Advance clear topcoat is right for your situation, then read the information on the following page.
Like all Lifeline finishes, Lifeline Advance is waterborne, environmentally friendly and easy to clean up with soap and water. It breathes to allow moisture within logs to evaporate, while controlling the evaporation rate to reduce checking. When you apply Lifeline Advance over your exterior stain, you increase the UV inhibitors, add water repellency and add additional mildew inhibitors to your exterior finish system.
Lifeline Advance also makes your exterior walls resistant to unsightly dust and dirt. When it is time to clean, Lifeline Advance makes your walls easier to clean, especially when using Log Wash cleaner for an annual cleaning.
Lifeline Advance is available in two different finishes. Lifeline Advance Satin dries to a flat or satin finish, depending on your application. If you prefer a flat appearance, then use just one coat of Satin. If you prefer a satin appearance, then use two coats of Lifeline Advance Satin.
Lifeline Advance Gloss dries to a glossier finish, depending on your application. If you desire a semi-gloss appearance, then apply one coat of Lifeline Advance Gloss. If you want a high gloss appearance, then apply two coats of Lifeline Advance Gloss. You will get longer life from two coats than you will from one coat.
Features and Statistics
- Mold and mildew protection
- Water - repellent
- Non-yellowing
- Adds gloss (satin)
- No oils (low VOC's)
- UV protection
- Forms clear, breathable film
- 1-2 coat application
*The 3-year warranty offered with the initial application of LL Ultra 2 with LL Advance topcoat, when applied to properly prepared wood and registration filed with Perma-Chink Systems, may be extended for an additional 2 years with the reapplication of the topcoat within 3 years of the initial application, for a total of a 5-year warranty.
Coverages
600-800 sq. ft., first coat per gallon
1000 sq. ft., second coat per gallon
|
Shelf Life |
|
Application Temperature |
|
Application Methods |
- Airless Sprayer
- Brush
- Back-brushing required
|
Surface Preparation |
- Clean and Dry
- Free of mold and mildew
- Never use steel wool
|
Frequency |
- 1-2 coats over LifeLine Exterior or LifeLine Ultra-2 stains, 1 coat 24-36 months later, then only as required
|
Special Instructions |
- Exterior, brushed to insure coverage
- Never apply clear coats to bare wood
|
Drying Time |
- Dry to the touch in 1 hour and cures in 3 days
|
MSDS
Application Guide |
|
Usually ships in 1-3 days, most often same day.
Ships by UPS Ground or Fed-Ex Ground Only. |
